Vehicle Power Hub 2300


Vehicle Power Hub 2300

Compact, robust design with high energy storage - the hub is designed to deploy power; fast and safely, from both inside a vehicle and outside making it flexible for leisure, commercial and industrial applications - Clean and silent power wherever and whenever you want it

AGM and conventional lead acid batteries limit depth of discharge, heavy and are sensitive to fast charging that quickly reduces life. Our new Power hub allows conventional batteries to be replaced with an all in one system that can deliver as much as 10x the cycle life, fast charging capability, 60% reduction in weight and a smaller profile.

Utilising Lithium battery technology (LiFePO4) the Vehicle Power Hub provides high energy density, higher usable watt hour capacity, fast charging capability and high cycle life - all major advantages especially in a service vehicle where kerb weight and engine run adds to a higher fuel consumption and increased pollution.

The Vehicle Power Hub is a fully integrated solution combining lithium battery, in vehicle DC-DC battery charger, integrated MPPT solar controller, 12VDC and USB outputs in a single portable and movable box. Plug and play input and output anderson connectors make install safe and easy and with supplied cables enable fast connection and removal from the vehicle when required.

A high current anderson output provides simple connection with a 12V-230V power inverter or 12V-230V inverter-charger solution up to 1800W making this product ideal as a flexible and scalable all in one power system - An inverter DC input cable is supplied pre configured and ready to connect to the hub.

A simple LCD control panel provides battery status and voltage and built in multi safety protection from internal battery management system (BMS), 200A battery isolator, internal fusing and circuit breaker ensure safe operation at all times.

The Vehicle Power Hub comes complete with fixing kit for install into the vehicle, 40A AC charger for fast charging from grid when available, solar cable and other accessory cables.

We offer the Vehicle Power Hub in three variants of watt hour capacities : 1000Wh, 1500Wh and 2300Wh making them an ideal solution for motor homes, camper vans and commercial vehicle conversions.


  • Portable, clean and safe Lithium (LiFePO4) battery provides 2300 watt hour of usable capacity - burn less fuel and reduce CO2 emissions when running high loads for long periods
  • Flexible charging options from high Power AC charger 40A, integrated 30A DC-DC charger for connection to alternator (inc EU6) and solar input up to 30A utilising the on board MPPT controller
  • Plug and play anderson connections provide multiple input/ouput configuration enabling fast and easy deployment
  • 150A DC output for direct connection to power inverter (up to 1800W)
  • Strong metal and ABS case with easy to install fixing system
  • LCD control panel provides battery status and voltage
  • Built in multi safety protection from BMS, battery isolator, fusing and circuit breaker
  • 2 x USB output and 2 x 12Vdc 10A sockets for device charging and powering 12V loads directly


Battery Type : Lithium Ion - LiFePO4

Nominal voltage/charge voltage : 12.8V/14.6V
Battery Capacity : 180Ah/2300Wh
Maximum Discharge current : 150A (1800W maximum power inverter connection)
Charging options : AC charger 40A (approx 4.5 hours)/ in vehicle DC-DC charger 30A (approx 6 hours)/ Solar-Max PV input 400W 12V
Ports : 2 x USB (2.1A)/ 2 x 12VDC 10A socket/ 2 x 50A Anderson (input/output - 50A total)/ 1 x external inverter Anderson connector (175A)
Dimensions : 455 x 240 x 330mm
Weight : 27Kg
Operating temperature : -10 deg C to +50 deg C
Warranty : 2 years

Battery Cycle Life : > 2000 cycles

Supplied Accessories :
External 40A battery charger with fused UK plug and terminated with Anderson connector.
IGN cable (ignition): 3 metres and connector for smart alternator program (EU6 vehicles).
Inverter connection cable : 1 metre 25mm² cable (red/black) terminated with 175A Anderson connector and M8 ring terminals.
Starter battery connection cable (for in vehicle charging): 1 metre. 7AWG cable (red and black) - Anderson connector to M8 terminals to make in line fuse connection and ground with each power station.
Solar cable : 1 metre 6mm2 - MC4 to Anderson connector.
Strapping kit.
Metal feet fixing kit with screws.
Spare Anderson connector kit.