Solar Powered Submersible Pump Kit
This kit will run in daylight. The pumps are variable speed so the flow rate will depend on the power input of the sun.
Typical performance at solar radiation 800 W/m²
Flow: 2.5 m³/h
Total head: 80.6 m
Solar Panel Array
6 x 270W poly solar panel
- Panel Width: 991mm
- Panel Height: 1,650mm
Ground mount kit or roof mounting included.
Solar Powered Submersible Pump
The pump with helical rotor is for high heads and low flows. Features and benefits:
Dry-running protection
High efficiency permanent-magnet motor (PM motor)
Over- and under voltage protection, Overload protection
Maximum Power Point Tracking (MPPT)
Wide voltage range
Cables and pipes:
Pump cable length: 80 m
Pump cable size: 4 mm²
Total cable loss: 3.2 %
Pipe Length: 90 m
Control Unit
The CU200 is a combined status, control and communication unit especially developed for the SQFlex system. The CU 200 also enables connection of a level switch. The CU 200 incorporates cable entries for:
Power supply connection
Pump connection
Earth connection
Level switch connection
It is possible to start, stop and reset pump with the on/off button. The CU 200 offers
System monitoring?
Alarm indication
Static lift above ground: 5 m
Dynamic water level: 70 m
Location: Southern England
Water production summary, Peak flow
Total water production per year: 5070 m³
Avg. water production per day: 13.9 m³/day
Average water production per watt per day: 8.3 l/Wp/day
